Last Updated on
Plasma cutting – OK, well we all know what plasma cutting is and you know what you’re wanting to cut with a plasma cutter, but do you really know which is the right one to buy and at the right price?
There are various makes and models out there to suit a range of budgets, but it can be fairly tricky to work out which of these will be perfect for you and your wallet.
Never fear! We are here!
But seriously, we’ve done all the grunt work for you, and come up with what we consider to be the 5 Best plasma cutters under $500.
In a Rush? Here is Our Top Choice
Top Plasma Cutters Under $500 On The Market 
5 Best Plasma Cutters Under $500 - Reviews
1. Lotos LTP5000D Plasma Cutter - Best Overall Pick
So, let’s take a peek at the Lotos LTP5000D. It’s a “pilot arc plasma cutter” which boasts super quality cutting all neatly packaged in a compact little bundle.
It’s ideal for those smaller DIY jobs at home, but is also perfectly suited to medium-scale commercial stuff.
The non-touch pilot circular plasma shaper is very efficient and can cut through really thick material too – you can slice your way through materials such as stainless steel, aluminum, copper, compound steel and, well, any type of conductive metal actually.
The really amazing thing about this device is that you can make cuts without stressing or misshaping the material you’re cutting.
This 50-amp digital inverter machine weighs a mere 20 pounds and is equipped with a propelled cooling frame and a switch control inverter. It can neatly cut its way through material up to ¾ inch thick – we think you’ll agree that this is a really good buy!
2. ZENY 50 Amp CUT-50 Plasma Cutter - The Runner-up
Now, the ZENY DC plasma cutter is fairly new on the market. It’s the perfect tool for the job of cutting through metal.
The cutter comes with a brilliant plasma torch, which has been designed specifically to upgrade and enhance the quality of every single cut.
This clever little number can be used to slice through materials for all sorts of applications – making sheet metal structures, construction site work, car repairs, ducting, general DIY … you name it, it can cut it!
The ZENY DC plasma torch uses 50Hz/60Hz with the V-MOSFET transforming this current down to the correct voltage, and the super lightweight inverter control is just perfect for the job – it will even increase productivity by 30%!
This dual-voltage 110-220V cutting equipment is both light and small, but creates a high electromagnetic field that seems impossible for such a compact structure.
What’s not to like?!
3. Lotos LT3500 Portable Plasma Cutter - Best Value
So, join us for a peek at the Lotos LT3500 now. This 35amp air plasma cutter has been designed to take on those lighter cutting jobs. As it’s one of the smallest plasma shapers on the market, it weighs in at just 8kg (17.6lbs)!
That said, the device is perfectly capable of cutting a piece of metal that is 10mm thick, so this gives you a great price/performance ratio for all your DIY chores.
As with the LT3500, the Lotos LT3500 boasts a higher amperage of 35 amps and yet is under 100V. It can be used alongside your air compressor too! What more could you want?
This under $500 machine is ideal for cutting alloy steel, stainless steel, mild steel, copper, aluminum etc., all while using non-hazardous, safe, compressed air and requiring little to no effort in the process! Food for thought we think?
4. SUNGOLDPOWER CUT50 Inverter Plasma-Cutter
Let’s take a look at the SUNGOLDPOWER air plasma cutter. It’s a member of the “CUT50” family and delivers a current of up to 50 amps.
All of these units offer a similar value range, and we noticed that most of them are either blue or yellow – go figure!
When considered along with other comparable models, you notice that it has an advanced LCD display too. It can ramp all the way up to 220 volts to enable the cutting of thicker surfaces – and it can slice down to a depth of 15 millimeters, too! Impressive, right?
As is the case with most of the lower range models, this below $500 unit comes with a 1-year guarantee and a fairly basic range of consumables.
The IGBT soft switch technology gives you stable performance, top currents and rapid switching speeds. It is particularly cost-effective at higher voltages, and the heat dissipation of this equipment is more powerful and far superior to MOSFET machines.
5. PrimeWeld Ct520d 50Amp Plasma Cutter
This multipurpose unit offers you a whole range of welding and cutting options. It can slice through various types of metal up to ½ inch thick and with a 50A plasma cutting capacity!
Weighing 32lbs, this machine is both convenient and solid. The fact that it combines plasma cutting, TIG/stick welding and arc welding functions too, makes it the perfect 3-in-1 cutter to meet all your welding and cutting needs! What’s not to like?
Our Top Choice Under $500
So, you’re now armed with five options under $500!
Which one will you choose? It’s a tricky number, but you’ve got a good range here; and we’re convinced you’ll find the one that is perfect for your needs – whether for your DIY requirements or semi-professional chores!
The Lotos LTP5000D is our top pick of the bunch! It has a great price/performance ratio and offers efficient, unparalleled cutting technology.